ProductsEngineered Fittings

Engineered Fittings

Click on the product name to view product catalog page, type and material specifications,submittal instructions or installation instructions.

  • Model #114  Mechanical Joint Repair Sleeve

    DescriptionFabricated mechanical joint repair sleeve for straight runs of pipe.

     

  • Model #114  Mechanical Joint Bell Repair Sleeve

    DescriptionA special repair sleeve for sealing over split or leaking cast iron bells, A/C couplings and welded couplings. Sizes 4" and larger.

     

  • Model #116  CSCP Repair Sleeve

    DescriptionA high pressure, reinforcing repair sleeve for repairing holes, punctures and splits in concrete steel cylinder pipe. Especially recommended for heavily damaged and larger sizes of pipe.

     

  • Model #118  Fabricated Repair Sleeve

    DescriptionHeavy duty, bolt on repair sleeve. Wide gasket encompasses damaged area to provide watertight seal. Sizes 4" and larger.

     

  • Model #136  All Stainless Heavy Duty Repair Clamp

    Description136 Heavy Duty Stainless Steel Repair Clamp incorporates the corrosion resistance of stainless steel, the full circumferential gasketing of a Universal Clamp Coupling and the triangular bolting configuration to provide a repair clamp coupling with high working pressure capabilities.

     

  • Model #412  Fabricated Steel Tapping Sleeve Shopcoat Alloy Bolts

    DescriptionThe standard sleeve for quick, economical taps on all types of pipe, standard or high pressure service. Most available of all types in standard or special sizes. Available with reducing and size on size outlets, pipe sizes 6" and larger. Special outlets readily available. As a standard, JCM tapping sleeve (flanged and MJ outlets) bolt patterns are configured for installation of the valve on a horizontal plane with a vertical valve stem position. For applications that require any other valve position, JCM sales team must be notified prior to fitting order to ensure the flange position will accommodate the application.

     

  • Model #414  Mechanical Joint Tap Slv

    DescriptionThis tapping sleeve combines the high strength and versatility of fabricated steel with the traditional side and end gasketed mechanical joint design. These sleeves are ideal for potential problem installations where strength, weight and beam load considerations are critical. High strength steel eliminates cracked casting or flange possibility while the side and end gaskets provide a complete seal around the pipe. The reduced weight of the steel aids in installation and handling as well as reduces load on the pipe. Available in larger sizes, non-standard sizes and with many special options (special flanges, special laying lengths, etc.) As a standard, JCM tapping sleeve (flanged and MJ outlets) bolt patterns are configured for installation of the valve on a horizontal plane with a vertical valve stem position. For applications that require any other valve position, JCM sales team must be notified prior to fitting order to ensure the flange position will accommodate the application.

     

  • Model #415  CSCP Tapping Sleeve

    DescriptionThese fabricated tapping sleeves are designed to reinforce the pipe and provide easy installation with maximum safety factor. The 415 provides a separate body and tapping gland. By separating the outlet gland from the sleeve body, the sleeve reinforces the pipe prior to removal of the critical prestress wire from the outlet area. JCM 415 Tapping Sleeves are in accordance with the AWWA M-9 Manual. Designed to tap all types and brands of concrete steel cylinder pipe. Sleeve reinforces pipe prior to cutting of pipe reinforcing rod. Extra heavy retained gasket and easily installed gland provide a locked in, positive seal. Available with reducing outlets in pipe sizes 16" and larger.

     

  • Model #452  SS Tapping Sleeve with Outlet Seal Gasket

    DescriptionAll stainless steel tapping sleeve for large diameter pipe and high pressure applications. Stainless construction provides superior corrosion resistance for long term service. Sizes 6" and larger. As a standard, JCM tapping sleeve (flanged and MJ outlets) bolt patterns are configured for installation of the valve on a horizontal plane with a vertical valve stem position. For applications that require any other valve position, JCM sales team must be notified prior to fitting order to ensure the flange position will accommodate the application.

     

  • Model #801  Expansion Joint - Single End

    DescriptionFor most applications requiring more than the 3/8" pipe movement capabilities of flexible couplings. Permits up to 10" of concentrated pipe movement. For additional movement use in series with limit rods on each unit. Standard packing includes alternating rings of lubricated flax and rubber. Standard with metal primer on body, chrome plated slip pipe. Special gaskets, slip pipe bolting and coatings are available on request.

     

  • Model #802  Expansion Joint - Double End

    DescriptionDouble end expansion joint is designed for special applications such as middle of line use where expansion joint body can be anchored. This fitting permits up to 10 inches of total pipe movement, 5 inches on each end, with properly anchored body.

     

  • Model #820  Spool Fab Plain End Tee

    DescriptionJCM Fabricated Spools, Meter Test Spools and Tees are available in many lengths and configurations to meet specific installation requirements. Short laying lengths and precise dimensions make these fittings extremely desirable in vault applications. These fusion epoxy coated steel fittings eliminate stress cracks common to iron fittings yet provide excellent corrosion resistance for use in underground vaults.

     

  • Model #822  Spool - Fab Flg x Tee

    DescriptionJCM Fabricated Spools, Meter Test Spools and Tees are available in many lengths and configurations to meet specific installation requirements. Short laying lengths and precise dimensions make these fittings extremely desirable in vault applications. These fusion epoxy coated steel fittings eliminate stress cracks common to iron fittings yet provide excellent corrosion resistance for use in underground vaults.

     

  • Model #823  Bypass Tee

    DescriptionJCM Fabricated Spools, Meter Test Spools and Tees are available in many lengths and configurations to meet specific installation requirements. Short laying lengths and precise dimensions make these fittings extremely desirable in vault applications. These fusion epoxy coated steel fittings eliminate stress cracks common to iron fittings yet provide excellent corrosion resistance for use in underground vaults.

     

  • Model #831  Flg x Flg with Test Outlet

    DescriptionJCM Fabricated Spools, Meter Test Spools and Tees are available in many lengths and configurations to meet specific installation requirements. Short laying lengths and precise dimensions make these fittings extremely desirable in vault applications. These fusion epoxy coated steel fittings eliminate stress cracks common to iron fittings yet provide excellent corrosion resistance for use in underground vaults.

     

  • Model #832  Flg x Flg w/o Test Outlet

    DescriptionJCM Fabricated Spools, Meter Test Spools and Tees are available in many lengths and configurations to meet specific installation requirements. Short laying lengths and precise dimensions make these fittings extremely desirable in vault applications. These fusion epoxy coated steel fittings eliminate stress cracks common to iron fittings yet provide excellent corrosion resistance for use in underground vaults.

     

  • Model #833  Flg x Plain End with Test Outlet

    DescriptionJCM Fabricated Spools, Meter Test Spools and Tees are available in many lengths and configurations to meet specific installation requirements. Short laying lengths and precise dimensions make these fittings extremely desirable in vault applications. These fusion epoxy coated steel fittings eliminate stress cracks common to iron fittings yet provide excellent corrosion resistance for use in underground vaults.

     

  • Model #834  Flange x Plain End w/o Test Outlet

    DescriptionJCM Fabricated Spools, Meter Test Spools and Tees are available in many lengths and configurations to meet specific installation requirements. Short laying lengths and precise dimensions make these fittings extremely desirable in vault applications. These fusion epoxy coated steel fittings eliminate stress cracks common to iron fittings yet provide excellent corrosion resistance for use in underground vaults.

     

  • Model #841  Surge Suppressor SSFlg

    DescriptionA simple and economical solution to reduce the number and costs or repairs, protect valuable system assets and eliminate loss of expensive treated water.

     

  • Model #842  Surge Suppressor CSFlg

    DescriptionA simple and economical solution to reduce the number and costs or repairs, protect valuable system assets and eliminate loss of expensive treated water.

     

  • Model #843  Surge Suppressor SSMJ

    DescriptionA simple and economical solution to reduce the number and costs or repairs, protect valuable system assets and eliminate loss of expensive treated water.

     

  • Model #844  Surge Suppressor CSMJ

    DescriptionA simple and economical solution to reduce the number and costs or repairs, protect valuable system assets and eliminate loss of expensive treated water.